Produktai skirti kompiuterinė atmintis (139)

Microcontrôleur à puce unique avec TCP/IP et 10/100M Fast Ethernet MAC/PHY (Caractéristiques 512K Flash, 16GPIOs, LQFP80) The AX11005, Single Chip Microcontroller with TCP/IP and 10/100M Fast Ethernet MAC/PHY, is a SystemonChip (SoC) solution which offers a high performance embedded micro controller and rich communication peripherals for wide varieties of application which need access to the LAN or Internet. With builtin network protocol stack, the AX11005 provides very cost effective networking solution to enable simple, easy and low cost Internet connection capability for many applications such as consumer electronics, networked home appliances, industrial equipments, security systems, remote data collection equipments, remote control, remote monitoring and remote management. In addition to standalone application, the AX11005

Smart IoT Arduino Solution - !! EN PROMOTION MAINTENANT !!This product integrates many sensors : GPS, temperature, pression, accelerometer and RF communications systems as LoRa, SigFox and BLE. It is dedicated for quick proof of concept realization thanks to Arduino open software environment. –Features: –Dimension: 80 x 40 x 20mm –Integrated antennas for long range ISM, GPS and BLE functions –Micro-USB connector for scenarios programming –Provided with 3,6V LiPo battery (300mAh), rechargeable with micro-USB connection –External functions: push button and programmable RGB led –External GPIO available for further used cases –For European market –Certified LoRaWan 1.0.2 class A & C and SigFox networks Dimension:80 x 40 x 20mm External functions:push button and programmable RGB led

LTE Cat-M1, NB-IoT, GRPS & GNSS Couverture mondiale Taille compact 24x24mmThe SIM7000G is a global LTE Cat M1, NB-IoT, GPRS and GNSS module It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application. The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market. Supply voltage range:3.0V~ 4.3V, Typ: 3.8V Operation temperature:-40℃ to +85℃ Dimensions:24 X 24 X 2.6mm Weight:3.0g

L96 est un module récepteur multi-GNSS simultané avec antenne à puce intégrée L96 is a concurrent multi-GNSS receiver module with embedded chip antenna. With 33 tracking channels, 99 acquisition channels and 210 PRN channels, L96 can acquire and track any mix of GPS, GLONASS, Galileo and QZSS signals. The built-in LNA provides the module with better performance under weak signal areas. The embedded chip antenna reduces the total size of customers’ applications. To meet varied application demands, L96 also provides an external antenna interface. Compared with using GPS only, enabling multiple GNSS systems generally increases the number of visible satellites, reduces the time to first fix and increases positioning accuracy, especially when driving in rough urban environments. Combining advanced AGPS called EASY™ (Embedded Assist System) and proven AlwaysLocate™ technology, L96 fully meets the industrial standard and provides greatly reduced TTFF and ultra-low power consumption. Ultra-compact size:14.0mm × 9.6mm × 2.5 mm

Real type clock function Clock/calendar function, auto leap year correction function, alarm and Timer function, etc. Interface type:3-wire serial interface Opening voltage range:1.6 V to 5.5 V Wide Timekeeper voltage range:1.0 V to 5.5 V / Ta = +25° C Low backup current:0.32 µA (Typ.) / 3V 32.768 kHz frequency output function:C-MOS output With OE pin.

Labels C7974A Standard Capacity LTO4, Measures 112 x 112 x 24 mm Merken:HP Kleur:blue OEM:C7974A  EAN:0882780869820

MCS9900 is a single lane multifunction PCI express to I/O controller. It supports two modes of operations which are selectable through device mode select pins. Mode1 supports four serial ports and GPIO, Mode2 supports two serial ports, one parallel port and GPIO. MCS9900 also provides an option for peripheral expansion through proprietary Cascade interface. The generic cascade interface allows interconnection with similar chips like MCS9900, MCS9904, MCS9901CVCC & MCS9922 for port expansion. The serial ports are compatible with RS232, RS422 & RS485 standards and supports throughput from 50bps to 16Mbps. Parallel Port is compatible with IEEE 1284 and supports Nibble, Byte, SPP, ECP, and EPP modes. All the GPIO pins are programmable and can be used as Input or Output. An I2C interface is provided to configure

nouvelle génération de module Quectel LTE Cat.4La série EC20 est une nouvelle génération de module Quectel LTE. Adoptant la technologie 3GPP Rel. 9 LTE, il offre des débits de liaison descendant et de liaison 50Mbps et est compatible avec quectel UMTS/HSPA+ UC20 dans le facteur de forme compact et unifié, offrant une plate-forme flexible et évolutive pour la migration de UMTS/HSPA+ vers LTE. EC20 contient quatre variantes: EC20-A, EC20-C, EC20-CE et EC20-E. Cela le rend rétrocompatible avec les réseaux EDGE et GSM/GPRS existants, ce qui garantit qu’il peut être connecté même dans des zones éloignées dépourvues de couverture 4G ou 3G. EC20 prend en charge la technologie MIMO (multiple-input multiple-output), une technologie d’antenne de pointe capable de transmettre plusieurs flux de données sur plusieurs émetteurs à plusieurs récepteurs. Les antennes à chaque extrémité du circuit de communication sont combinées pour minimiser les erreurs et optimiser la vitesse des données.

Double bande HSPA+/WCDMA et Quad-Band GSM/GPRS/EDGE module type SMT Prend en charge HSPA+ jusqu’à 14,4 Mbps pour le transfert de données de liaison vers le bas. The SIM5360 series is Dual-Band HSPA+/WCDMA and Quad-Band GSM/GPRS/EDGE module solution in a SMT type which supports HSPA+ up to 14.4Mbps for downlink data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, SPI, I2C,Keypad, etc. With abundant application capability like TCP/UDP/FTP/FTPS/ HTTP/ HTTPS/SMTP/POP3 and MMS, the module provides much flexibility and ease of integration for customer’s application. SIM5360A:Dual-Band UMTS/HSPA+ 850/1900MHz - Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz SIM5360(J)E:Dual-Band UMTS/HSPA+ 900/2100MHz - Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz SIM5360J(D):Dual-Band UMTS/HSPA+ 800(850)/2100MHz - Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz UMTS 850/1900:0.25W UMTS 900/2100:0.25W DCS1800/PCS1900:1W Supply voltage range:3.4V~ 4.2V Operation temperature:-40℃ to +85℃ Dimension:30 X 30X 2.9 mm Weight:5.7g

MCS9904 is a single lane multifunction PCI express to I/O controller. MCS9904 supports four serial ports and eight GPIO's. MCS9904 also provides an option for peripheral expansion through proprietary Cascade interface. The generic cascade interface allows interconnecting with other ASIC's like MCS9900 to expand the peripheral ports. The serial ports are compatible with RS232, RS422 & RS485 standards and supports throughput from 50bps to 16Mbps. All the GPIO pins are programmable and can be used as Input or Output. An I2C interface is provided to configure MCS9904 device options through an external EEPROM. PCI Express Singlelane (X1) PCI Express Endpoint Controller with integrated PHY Compliant with PCI Express Base Specification, Revision 1.1 Compliant with PCI Express card specifications Supports four PCI Express functions Supports auto completion of configuration requests Supports built in flow control Supports Message TLP

RX-4035SA Buit in 32.768 kHz crystal unit:Frenquency adjusted for high accuracy Interface type:SPI-Bus (1 MHz) Operating voltage range:2.4 V to 5.5 V Timekeeping voltage range:1.0 V to 5.5 V Low backup current:350 nA(SA) 400 nA(LC)/ 3 V (Typ.) Dual event detection ports:Each terminal has a de-bounce circuit Auto power switching functions:When VDD deteriorates than 2.4 V internal source is switched to VBAT

Sopport à basse température Size(inch):2.9 Resolution(HxV):296 x 128 Active Area(mm):66.9 x 29.06 Outline Dimensions(mm):79.0 x 36.7 Dpi:112 E Ink Film:Aurora Backplane:Glass Total Thickness:1.15mm Total Weight:4g Grey Level:BW Front Light:N Surface Treatment:Anti-glare Treatment

Module LTE Cat.4 optimisé spécialement pour les applications M2M et IoT Quectel EC25 est une série de modules LTE de catégorie 4 optimisés spécialement pour les applications M2M et IoT. Adoptant la technologie 3GPP Rel. 11 LTE, il offre des débits de liaison descendant de 150 Mbit/s et des débits de liaisons 50Mbit/s. Conçu dans le cadre d’un facteur de forme compact et unifié, EC25 est compatible avec le module Quectel UMTS/HSPA+ UC20 et le module multi-mode LTE EC20/EC21, ce qui permet une migration flexible entre eux dans la conception et la fabrication. EC25 contient 6 variantes. Cela le rend rétrocompatible avec les réseaux EDGE et GSM/GPRS existants, ce qui garantit qu’il peut être connecté même dans des zones éloignées dépourvues de couverture 4G ou 3G. EC25 prend en charge la technologie de localisation Gen8C Lite de Qualcomm™® IZat. Le GNSS intégré simplifie grandement la conception du produit et offre un positionnement plus rapide, plus précis et plus fiable. Améliorations des fonctionnalités:prend en charge DFOTA*, eCall*, QuecLocator et DTMF

M7000 SATA III M.2 2280 SSD jusqu’à 550 Mo/s. Ces SSD sont disponibles avec MLC et PSLC NAND en deux facteurs de forme M.2 : 22 x 42 mm et 22 x 80 mm. MLC:4 - 512 GB pSLC:2 - 256 GB Interface:SATA III (6 Gb/s) Form factor:M.2 size 2280 Memory chips:MLC / pSLC NAND flash Controller:Phison PS3111-S11 Data retention:over 10 years in temp. 25°C MTBF:>2 000 000 hours Max. power consumption:<2 650 mW Storage temperature:-45 - 85°C Dimensions:80 x 22 x 3,8 mm Max. Transfer:read: up to 550 MB/s write: up to 490 MB/s Program/erase cycles:MLC: 3000 pSLC: 20 000

Modules d’extension COM/Parallel Ports:1 Parallel 2 COM DIMENSIONS:101.4mm x 48.89mm REAR PANEL I/O PORTS:2 DB-9 RS232 serial ports I/O CONNECTORS:1 parallel port

M95 est un module GSM/GPRS très compact M95 is a highly compact Quad-band GSM/GPRS module in LCC castellation packaging in the market. It adopts the latest MTK chipset and features compact size of 19.9mm × 23.6mm × 2.65mm, ultra low power consumption and extended temperature range. With surface mounted technology, the low profile and small size of LCC package make M95 easily embedded into the low-volume applications and ensure the reliable connectivity with the applications. This kind of package is ideally suited for large-scale manufacturing which has the strict requirements for cost and efficiency. Built-in unique QuecFOTATM technology allows M95 to update the firmware remotely. Additional features such as integrated TCP/IP protocol stacks, serial multiplexer and enhanced AT commands guarantee fast and reliable transmission of data, voice, SMS via GSM/GPRS network and extend the functionality of the application at no additional cost.

LTE CAT4/HSPA+/GRPS/EDGE GNNS Dimension: 30*30*2.9 mmLa solution SIM7600E-H est un multi-band LTE-TDD/LTE-FDD/HSPA+ et GSM/GPRS/EDGE dans un type SMT qui prend en charge LTE CAT4 jusqu’à 150 Mbps pour le transfert de données downlink. Il a une forte capacité d’extension avec des interfaces riches, y compris UART, USB2.0, I2C, GPIO etc. Avec une capacité d’application abondante comme TCP/UDP/FTP/FTPS/HTTP/HTTPS/DNS, le module offre beaucoup de flexibilité et de facilité d’intégration pour l’application du client. Supply voltage range:3.4V~ 4.2V Operation temperature: -40℃ to +85℃ Dimension:30*30*2.9 mm Weight:5.5g

BC68 est un module haute performance NB-IOT qui prend en charge plusieurs bandes de fréquences : B1/B3/B8/B5/B20/B28 avec une consommation d'énergie extrêmement faible. BC68 is a high-performance NB-IoT module which supports multiple frequency bands of B1/B3/B8/B5/B20/B28 with extremely low power consumption. The ultra-compact 17.7mm × 15.8mm × 2.3mm form factor makes it a perfect choice for size sensitive applications. Designed to be compatible with Quectel GSM/GPRS M66 module in the compact and unified form factor, it provides a flexible and scalable platform for migrating from GSM/GPRS to NB-IoT networks. BC68 adopts surface mounted technology, making it an ideal solution for durable and rugged designs. The low profile and small size of LCC package allow BC68 to be easily embedded into space-constrained applications and provide reliable connectivity with the applications. Fast time-to-market:Reference designs, evaluation tools and timely technical support minimize design-in time

Émetteursrécepteurs RS232 de faible puissance 5V 250Kbps (Caractéristiques 16 broches, oscillation de tension de sortie ±6V) The ZT232E series devices are +5V powered EIA/TIA232 and CCITT V.28/V.24 communication interfaces with low power requirements. These transceivers consist of two line drivers, two line receivers and the proprietary switchcapacitor regulated voltage converters. The ZT310E and ZT312E feature a low power shutdown mode which draws as little current as 1µA typical with receiver outputs tristated and in wakeup. These devices operate from a single +5V power supply at the guaranteed data rate of 250K bits/sec with enhanced electrostatic discharge (ESD)